20
SELECTIVE CALL
Selective Call is enabled or disabled by your dealer.
This function is similar to Code Squelch {page 18}. The
differences from Code Squelch are:
•You can send or receive message codes containing a
maximum of 5 digits.
•Selective Call turns the squelch OFF only when the
transceiver receives a predetermined DTMF code in the
correct sequence:
1) A 3-digit ID code
2) A 1-digit Intermediate code
3) A message code (up to 5 digits)
Your dealer may also activate Group Call for your
transceiver. This is useful when you want to pass
information to a number of units in a fleet. Ask your
dealer for details.
Note:
Selective Call cannot be used on channels programmed with
Code Squelch or 2-Tone Signalling.