22
EMERGENCY CALLS
If your transceiver has been programmed with the Emergency function, you can
make emergency calls.
1Press and hold the key programmed as Emergency.
•Depending on the delay time programmed into your transceiver, the length of time
you must hold the Emergency key will vary.
•When the transceiver enters Emergency mode, the transceiver will change to the
Emergency channel and begin transmitting based on how the transceiver is set up
by your dealer. Transmit periods are also set by your dealer.
2To exit Emergency mode, press and hold the Emergency key again.
•If the Emergency mode completes the preset number of cycles, Emergency mode
will automatically end and the transceiver will return to the channel that was in use
before Emergency mode was entered.
Note:
◆Your dealer can set the transceiver to emit a tone when Emergency mode starts and stops
◆Your dealer can set the transceiver to emit tones and received signals as normal or mute the
speaker during Emergency operation.