7

PROGRAMMABLE AUXILIARY FUNCTIONS

Keys y to !1 {pages 4 and 5} can be programmed with the auxiliary functions

listed below. The keys can only be programmed with functions, depending on

whether you are using a Conventional Group or a Trunking System. Please

contact your dealer for further details on these functions.

•Auto Telephone
•AUX A
•AUX B
•Channel/GID* Down
•Channel/GID Recall
•Channel/GID Up
•Direct CH**/GID 1
•Direct CH/GID 2
•Direct CH/GID 3
•Direct CH/GID 4
•Direct CH/GID 5
•Display Character
•Emergency Call 1
•Home Channel/GID
•Horn Alert
•LCD Backlight
•Message Mode 2
•Monitor
•None
•Operator Selectable Tone 3
•Public Address
•Scan
•Scan Del/Add
•Scrambler 4
•Send GPS 5
•Speaker Internal/External
•Squelch Level 3
•Talk Around
•TEL Disconnect
•2-Tone Encode 3
•Zone Down
•Zone Up
1This function can be programmed only on keys
y
to
!1
(
PF1
to
PF6
).
2This function can be programmed only on keys
u, i
and
!1
(
PF2
,
PF3
and
PF6
).
3These functions can be used only in Conventional Groups.
4This function can be selected only when the Scrambler board has been installed.
5This function can be selected only when an external GPS receiver has been installed.
*GID = Group ID
** CH = Channel

The selector can be programmed with the following three functions. Please

contact your dealer for further details on these functions.

•Channel/GID Up/Down
•None
•Zone Up/Down