9
TRUNKING ZONES

PLACING A DISPATCH CALL

1Select the desired trunking zone and a group ID.
2Press and hold the PTT switch.
3If the “Clear to Talk” tone sounds, communication is possible; start speaking
into the microphone. Release the PTT switch to receive.
•For best sound quality at the receiving station, hold the microphone approximately
1.5 inches (3 ~ 4 cm) from your mouth.
4When your conversation is finished, return the microphone to its hanger.

RECEIVING A DISPATCH CALL

1When a dispatch call is received, the transceiver will automatically change to
the correct channel and you will hear the call.
2Readjust the volume as necessary.

PLACING A TELEPHONE CALL

Note: You can only make a telephone call if the telephone service is available and you have an optional
keypad microphone. Refer to “DTMF CALLS” on page 12. Consult your dealer for further details.
1Select the desired trunking zone and a group ID.
2Press and hold the PTT switch for approximately 1 second to ensure a
connection.
•Confirm that there is a dial tone after releasing the PTT switch.
3Dial using the microphone keypad.
•After dialling, wait for a response from the called party.
4When the called party responds, press and hold the PTT switch and speak
into the microphone. Release the PTT switch to receive.
•Only one person can speak at a time.
5To end the call, press the # key or the key programmed as TEL Disconnect.

RECEIVING A TELEPHONE CALL

1When a telephone call is received, the transceiver will automatically change to
the correct channel and you will hear the call.
2To respond to the call, press and hold the PTT switch and speak into the
microphone. Release the PTT switch to receive.
•Only one person can speak at a time.
3To end the call, press the # key or the key programmed as TEL Disconnect.