Kenwood TK-8150 CLEARING STORED DTMF NUMBERS, R

CLEARING STORED DTMF NUMBERS

1Press and hold the microphone # key for 1 second.

•“D” appears on the display.

2Press the # key again.

•“D–CLEAR” appears on the display.

•To cancel the process, press any key other than 0 ~ 9.

3Enter the desired memory location number (01 ~ 32).

REDIALLING

1Press and hold the microphone key for 1 second.

•“A” appears on the display.

2Press the 0 key two times.

3Press the PTT switch to make the call.

Note: Switching the transceiver power OFF clears the redial memory.

Contents

Main THANK YOU MODELS COVERED BY THIS MANUAL NOTICES TO THE USER P ii CONTENTS UNPACKING AND CHECKING EQUIPMENT SUPPLIED ACCESSORIES PREPARATION TOOLS REQUIRED POWER CABLE CONNECTION INSTALLING THE TRANSCEIVER ORIENTATION FRONT PANEL AND MICROPHONE D REAR PANEL 7 PROGRAMMABLE AUXILIARY FUNCTIONS BASIC OPERATIONS OPERATION OVERVIEW SWITCHING POWER ON/ OFF ADJUSTING THE VOLUME SELECTING A ZONE AND CHANNEL/GROUP ID TRUNKING ZONES PLACING A DISPATCH CALL RECEIVING A DISPATCH CALL PLACING A TELEPHONE CALL RECEIVING A TELEPHONE CALL CONVENTIONAL ZONES T R 2-TONE SIGNALLING SCAN SCAN TYPES DTMF CALLS MANUAL DIALLING STORING DTMF NUMBERS DIALLING STORED DTMF NUMBERS CLEARING STORED DTMF NUMBERS R FleetSync: ALPHANUMERIC TWO-WAY PAGING FUNCTION KEY FUNCTIONS O PTIONAL F SELCALL (SELECTIVE CALLING) STATUS MESSAGE Page ADVANCED OPERATIONS TIME-OUT TIMER (TOT) BUSY CHANNEL LOCKOUT (BCL) TALK AROUND EMERGENCY OPERATION BEGINNING/ END OF TRANSMISSION ID SIGNAL