Kenwood VR-9070 22 EN, Use the, Press the, DISP LISTEN, DISP SELECTOR, Indication in feet, : ____ feet (meters), : ____ feet (meters), If you have selected

Preparing for surround sound

7Adjust the bass peak level.

A restriction is put on the low frequency so that the bass peak level will not go higher than the acceptable level when the volume is increased.

If Subwoofer is OFF, the limitation will affect the low frequency of the Front Left and Right Speakers.

1Press the 5/∞ keys or MULTI @/ # keys to select BASS PEAK and press the SETUP key.

		SP	MUTE	STEREO
L	R	A B	CLIP
	LFE

2Use the MULTI CONTROL knob or MULTI %/fi keys to adjust the bass peak level to –30dB.

•The adjustment range is from – 30dB to 0dB and OFF.

3For optimum bass peak level, keep increasing the bass peak level by using the MULTI CONTROL knob or MULTI %/fi keys while test tone is being output until clip sound is heard from the Subwoofer or Front Speaker.

SP MUTE

4Repeat steps 3 to input the distance for each of the speakers.5Press the SETUP key again to return to main setup displays.

•The speakers you have selected should appear on the display. Confirm that all the speakers have been correctly selected.

9Adjust the LFE LEVEL (Low Frequency Effects).

1Press the 5/∞ keys or MULTI @/# keys to select the LFELEVEL and press the SETUP key.2Use the MULTI CONTROL knob or MULTI %/fi keys to adjust the LFE LEVEL.

		SP	MUTE	STEREO
L	R	A B	CLIP

• The LFE LEVEL can be adjusted from 0dB to -10dB in 1dB decrements.3Press the SETUP key again to return to main setup displays.

0Select the display mode.

1Press the 5/∞ keys or MULTI @/# keys to select the DISPMODE and press the SETUP key.

SW

LFE

A B CLIP

2Use the MULTI CONTROL knob or MULTI %/fi keys to select the display mode.

4Press the SETUP key to accept the setting.

8Input the distance to the speakers.

•Indicators appear only for the channels of the speakers selected in step 4.

1 Press the 5/∞ keys or MULTI @/# keys to select the SPDISTANCE on setup displays and press the SETUP key again.2Measure the distance from the listening position to each of the speakers.Jot down the distance to each of the speakers.

Distance to Front Left Speaker (L)	:	____ feet (meters)
Distance to Center Speaker (C)	:	____ feet (meters)

Distance to Front Right Speaker (R) : ____ feet (meters) Distance to Surround Right Speaker (SR)

: ____ feet (meters)

Distance to Surround Back Right Speaker(SBR)

: ____ feet (meters)

Distance to Surround Back Speaker(SB)

	: ____ feet (meters)
Distance to Surround Back Left Speaker (SBL)
	: ____ feet (meters)
Distance to Surround Left Speaker (SL)
	: ____ feet (meters)
Distance to Subwoofer (SW)	: ____ feet (meters)

•If you have selected “SB NML/THXx1” or “SB LARGEx1”, “SBR” and “SBL” are not appeared but “SB” is appeared on the Display.

3Use the 5/∞ keys or MULTI @/# keys to select the speakers and the MULTI CONTROL knob or MULTI %/fi keys to adjust the distance to the Front Speakers.

1	DISP SELECTOR			: Displays the current input selector.
2	DISP LISTEN			: Displays the current listen mode.
		SP	MUTE	STEREO
L	R	A B	CLIP

3Press the SETUP key again to accept the setting.4Use the 5 key or MULTI # key to select EXIT.

		SP	MUTE	STEREO
L	R	A B	CLIP

SL S SB SR

5Press the SETUP key to exit the SETUP mode.

The speaker indicator to be adjusted blinks.

			SP	MUTE	STEREO
L	C SW	R	A B	CLIP
	LFE
SL S	SB	SR

Indication in feet Indication in meters

•The allowable setting range is 1 to 30 feet (0.3 to 9.0 m), adjustable in 1 foot (0.3 m) increments.

22 EN