Kenwood KDC-MP925, W8027 How to enter the test mode, How to exit from the test mode, Initial status in the test mode, Special display in Tuner mode, Forced switching of K3I, Test mode specifications of the CD receiver, Audio-related specifications

KDC-MP925/W8027

● How to enter the test mode

While pressing and holding the Preset 1 and Preset 3 k eys ,

reset the unit.

● How to exit from the test mode

While holding the Preset 6 key, reset the unit.

Note : Turning A CC off, po wer off, momentary power do wn

or panel detaching does not terminate the test mode.

● Initial status in the test mode

• Sources : ALL OFF

• Display : All segments are lit.

•Volume : -10dB (displayed as “30”)

• Loudness : OFF

• CRSC : OFF regardless of the presence of s witching func-

tion.

• SYSTEM Q : Flat

•WOW : All OFF

• BEEP : When pressing any keys, the buzzer generates a

beep at any time.

•AUX : ON

• MENU SYSTEM Q : OFF

•Variable model : Default is white

• Multifunction : Source dependency (Preset, SCAN, etc.)

● Special display in Tuner mode

When any of the following messages is displayed in Tuner

mode, the F/E may be abnormal.

• “TNE2P NG” : The EEPROM is set to the default (unstable

values) because the F/E was shipped without passing

through the adjustment process, etc.

• “TNCON NG” : Communication with the F/E is not possib le .

● Forced switching of K3I

Each press of the Preset 6 k ey in Tuner mode should s witch

K3I from AUTO→Forced Wide →Forced Middle→Forced

Narrow→AUTO.

The initial status is AUTO and the display shows these

modes as follows.

•AUTO : FMA

•Forced Wide : FMW

•Forced Middle : FMM

•Forced Narrow : FMN

● Test mode specifications of the CD receiver

•Forced ejection is inhibited in the reset start operation. When

the unit is reset while a CD is loaded in it, resetting does

not recognize the CD.

• Each press of the Trac k Up k e y jumps to the f ollowing track

numbers :

No. 9→No. 15→No. 10→No. 11→No. 12→No. 13→No. 22

→No. 14→No. 9 (The cycle restarts from here.)

• Each press of the Track Down key jumps to the previous

track number to the track being played.

•When the number of total trucks of the MP3 disc or the

WMA disc is less than 9, 1st truck is played.

• When the disc media is CD, A short press of the Preset 1

key jumps to the track number 28.

• When the model is equipped the CD mechanism assemb ly

adapted for MP3 or MP3/WMA disc, the mechanism name

and version number are displayed dur ing the FL model is

lower stand and Display mode of LCD model is DNPS.

● Audio-related specifications

• Pressing the ✽ key on the remote initiates the audio adjust-

ment mode.

• BL/F key on the Fader initials.

• Continuous holding of a remote control ke y is inhibited, and

workings are short press of any keys.

• Bass, Middle and Treb le are adjusted in 3 steps of -8 / 0 /+8

with the Track Up/Down keys (Default value at 0).

• Balance is adjusted in 3 steps of L15 / 0 / R15 with the

Track Up/Down keys (Default value at 0).

•Fader is adjusted in 3 steps of R15 / 0 / F15 with the Track

Up/Down keys (Default value at 0).

• HPF is adjusted in 2 steps of OFF / 170Hz (or 200Hz) with

the Track Up/Down keys (Default value at OFF).

• LPF is adjusted in 2 steps of OFF / 120Hz with the Track

Up/Down keys (Default value at OFF).

• Bass f, Bass Q, Bass EXT, Middle f, Middle Q and Treble f

are not dealt with by the audio adjust.

•The WOW key passes during the audio adjustment as fol-

lowing steps (WOW model only).

Ordered TruBass FOCUS SRS Display

1OFF OFF OFF SRS WO W OFF

2ONOFF OFF SRS TruBass ON

3OFF LOW OFF FOCUS LOW

4OFF HIGH OFF FOCUS HIGH

5OFF OFF ON SRS ON

6ONHIGH ON SRS W O W HIGH

TEST MODE