38

Convenient CD recording

R-SE7/DP-SE7/X-SE7 (En)

One-touch recording of an entire CD (ONE TOUCH EDIT.....recording of all tracks)

When the O.T.E. key is pressed while the CD player is in the stop mode, recording of a CD can be started at the same time as playback.

When the DM-SE7 (option) is connected and the input selector is set to “MD”, the same procedure can be used to make a one-touch recording of the entire MD on tape.

Recording preparations are required.(Steps 1 to 4)

Preparation section

Basic section

Application section

Knowledge sections

1Check that the CD player is in the stop mode.

If it is in play mode

÷ When recording a CD, set the input selector to CD.

7

Step 2 also can be executed after the order of the tracks has been programmed.2Press the O.T.E. key.

O.T.E.

÷ Recording of CD starts at the same time as playback. ÷ When the tape direction is changed at the end of the tape, no sound is recorded on the guide tape. When interruption of a track is to be avoided, restart recording from the very beginning of the reverse side according to

"Recording".

To end recording in the middle

7

÷ Both the cassette deck and CD player stop.