In case of difficulty 53

R-SE7/DP-SE7/X-SE7 (En)

Receiver unit, speakers

Symptom

Cause

Remedy

 

After presetting, reception is not

÷ The frequency of the preset sta-

÷ Preset stations with tunable fre-

possible with preset call.

tion is not tunable.

quencies.

 

 

÷ Thepresetmemoryhasbeencleared

÷ Preset stations again.

 

because the power cord has been

 

 

 

unplugged for a long period.

 

 

 

 

 

 

Cassette deck unit

Symptom

Cause

Sound cannot be produced by

÷ The head is dirty.

pressing the play key or no opera-

÷ The tape is wound too tight due to

tion occurs even when an opera-
tion key is pressed.

irregular winding.

 

÷ A nonrecorded tape is played.

No operation occurs even when

÷ Theoperationkeyispressedinlessthan

an operation key is pressed.

4 seconds after turning the power ON.

 

÷ A tape is not inserted in the unit.

 

÷ The tape is wound too tight due to

 

irregular winding.

 

÷ The tape is fully wound to one of

 

the reels.

The DPSS malfunctions.

÷ The tape used is not suitable for

 

DPSS, for example the spaces be-

 

tween tunes may be too short.

The tray does not open when the

÷ The key is pressed during recording.

Open/Close key is pressed.

÷ The microcomputer is malfunction-

 

ing due to external noise.

Sound is harsh or high

÷ The head is dirty.

frequencies are not reproduced.

÷ The tape is stretched or shrunk.

 

Sound is distorted.

÷ The recording revel has not been

 

set with the CRLS key.

 

÷ The tape being played was re-

 

corded with distorted sound.

Noise is noticeable.

÷ The tape head is magnetized.

 

÷ External noise is induced.

 

÷ A tape recorded with Dolby NR ON

 

is played with Dolby NR OFF.

Sound fluctuates.

÷ The capstans or pinch rollers are dirty.

 

÷ The tape is wound irregularly.

 

 

Remedy

 

 

÷ Clean the head referring to “Maintenance”.

 

÷ Try another tape.

p

Preparation

 

 

 

÷ Play a recorded tape.

 

section

÷ Press operation keys after waiting for

 

more than 4 seconds.

 

÷ Insert a tape.

 

÷ Try another tape.

˛

 

÷Change the tape transport direction or re- verse the tape insertion orientation. £

÷ Refer to “DPSS”.

¢

section Basic

÷ Press in stop mode.

£

÷Unplug the power cord and plug it again.

W

÷Clean the head referring to “Maintenance”. p

÷Try another tape.

÷ Try another tape.

Application

÷ Refer to “Recording”.

 

÷ Demagnetize the head referring to “Main-

section

tenance”.

p

 

÷Install the system at a distance from other electric appliances and TV.

÷ Set the Dolby NR to on.

£

Knowledge

÷ Wind the tape again by fast forwarding,

÷ Clean the head referring to “Maintenance”.

 

 

p

section

rewinding or playing from an end to the

 

other.

£