Kenwood HOW TO USE THE BUILT-IN TIMER

33 EN
HOW TO USE THE BUILT-IN TIMER
•Before setting the timer, make sure that the clock setting is correct. (page 11)
Timer playback
1Press the ON/STANDBY button to turn the
power on
2Press the CD, TUNER (BAND), TAPE (A/B) or
VIDEO/AUX button to select the desired func-
tion, and then adjust the sound volume using
the VOLUME CONTROL.
3Press the TIMER button repeatedly until “ ”
is displayed.
4Press the TUNING/TIME (%UP or fiDOWN) but-
ton to set the hour start time, then press the
MEMORY/SET button.
5Press the TUNING/TIME (%UP or fiDOWN) but-
ton to set the minute start time, then press the
MEMORY/SET button.
•The unit will enter the standby mode automati-
cally, and the STANDBY/TIMER indicator will light
up.
6When the preset time is reached, the timer play-
back will start.
•The volume will increase gradually.
Notes :
•When performing timer playback using an exter-
nal unit connected to the VIDEO/AUX socket,
only the power of the main unit will be turned
off automatically. (The power of the external unit
will not be turned off.)
•If you select CD or TAPE, the unit will enter the
standby mode after the playback. If you select
TUNER or VIDEO/AUX, it will enter the standby
mode one hour after the timer playback starts.
TUNER
(BAND)
CD
TAPE (A/B)
BAND / TUNER
CD
POWER
TAPE (A/B)
TIMER
MEMORY/
SET
VOLUME
CONTROL
TUNING/
TIME (%UP
fiDOWN)
VIDEO / AUX
VOLUME
MEMORY
/SET
TIMER TUNING/TIME
(fi %)
4
5
ON/
STANDBY
VIDEO/AUX
STANDBY/TIMER