37 EN
RESETTING THE MICROCOMPUTER
Reset the microcomputer under the following con-
ditions :
•To erase all of the stored memory contents (clock
and timer settings, and tuner and CD presets).
•If the display is not correct.
•If the operation is not correct.
1Press the ON/STANDBY button to enter
the standby mode.
2Whilst pressing down the 7 STOP button and
the SOUND MODE button, hold down the
ON/STANDBY button for at least 1 second.
•“CLEAR AL” will appear.
Caution :
•The operation explained above will erase all data
stored in memory including clock and timer set-
tings, and tuner and CD presets.
TRANSPORTING THE UNIT
Before you move this product to a new location,
proceed as follows :
1Press the ON/STANDBY button to turn the
power on.
2Press the CD button.
3Press the 0 OPEN/CLOSE button to open the
disc tray.
•Remove all CDs inserted in the unit.
4Press the 0 OPEN/CLOSE button to close the
disc tray.
•Make sure that “NO DISC” is displayed.
5Press the ON/STANDBY button to enter
the standby mode and then unplug the AC power
cord from the AC socket.
SOUND
MODE
ON/
STANDBY
7 STOP
ON/
STANDBY
CD
0 OPEN/CLOSE