Kenwood XR-S17P manual LOADING/CHANGING START-UPSCREEN 5 SERIES

The DDX712 contains the entertainment features of the DNX7120 but does not include built-in navigation. Customers can always add KNA-G510 navigation later with our Nav ready inputs.

The DNX5120 All-in-One Entertainment/ Navigation has a 6.1” fixed screen, USB Direct Control and is Bluetooth, satel- lite and HD Radio ready.

The New Kenwood 5 Series: Tastes Great, Less Filling

Even budget-conscious customers can enjoy awesome in-dash video with our new Kenwood 5 Series: the DNX5120, DDX512 and KVT-512. These models offer many of the advanced features of the 7 Series minus a few, so we can pass on the savings.

The DNX5120 is the DNX7120 “light” with a fixed 6.1” touchscreen, front aux input, and 2 RCA pre-outs with switch-able rear/sub and Crossover. Like the DNX7120, it includes a built-in Garmin Navigation Board with maps of U.S., PR, Alaska and Hawaii. This unit does not include 3 skin select and has 2 RCA pre-outs as opposed to three. The GUI does have the customizable start-up and Variable Illumination that allows users to customize their display to match the interiors of their cars. (Keep in mind that there is no SD card slot, so mapping updates are done via DVD.)

LOADING/CHANGING START-UP SCREEN (5 SERIES)

1.First connect the USB Thumbdrive containing image file.

2.To enter setup Mode, press SRC+EJECT, then RESET.

•Press and hold SRC & EJECT keys, then press RESET Key.

•Release reset key, and hold SRC & EJECT Key until Red LED activates.

•If you want to change the opening image to your own image (i.e., company logo), Press OEM Image.

•If you want to put original KENWOOD opening back,press KENWOOD image.

•Select the image you want to use.

•When the image is loaded, select Enter

Your new opening will remain for few seconds and then switch to the Source Select menu.

LOADING/CHANGING START-UP SCREEN (7 & 8 SERIES)

1.First connect the USB Thumbdrive containing image file.

2.To enter setup Mode, press SRC+EJECT, then RESET.

•Press and hold FNC & EJECT keys, then press RESET Key.

•Release reset key, and hold FNC & EJECT Key until illumination activates.

•If you want to change the opening image to your own image (i.e., company logo), Press OEM Image.

•If you want to put original KENWOOD opening back,press KENWOOD image.

•Select the image you want to use.

•When the image is loaded, select Enter

Your new opening will remain for few seconds and then switch to the Source Select menu.

WWW.KENWOODUSA.COM MOBILE VIDEO

23