10 | English
General features
AttenuatorTurning the volume down quickly.
Press the [ATT] button.
Each time you press the button is pressed, the
Attenuator turns ON and OFF.
When the Attenuator is ON, the "ATT" indicator
blinks.
Audio Control1 Select the source to adjust
Press the [SRC] button.
2 Enter Audio Control mode
Press the [VOL] knob.
3 Select the Audio item to adjust
Press the [VOL] knob.
Each time you press the knob, the item to be
adjusted alternates between the items shown in
the table below.
4 Adjust the Audio item
Turn the [VOL] knob.
Adjustment Item Display Range
Rear Volume *1"REAR VOLUME"0 — 35
Subwoofer level*2*3"SW LEVEL" –15 — +15
Balance "BALANCE" Left 15 — Right 15
Fader*3"FADER" Rear 15 — Front 15
Exit Audio Control mode
• *1 You can control this item when "2ZONE" of <Audio
Setup> (page 10) is set to "ON".
• *2 You can control this item when Speaker Select
Subwoofer of <Sound Management system> (page
13) is set to any item other than "None".
• *2 You can control this item when <Subwoofer
Output> (page 11) is set to "SUBWOOFER ON".
• *3 You can control this item when "2ZONE" of <Audio
Setup> (page 10) is set to "OFF".
5 Exit Audio Control mode
Press the [AUTO] or [NEXT] button.
Audio SetupSetting the Sound system, such as Volume offset
and Dual Zone.
1 Select the source to adjust
Press the [SRC] button.
2 Enter Audio Setup mode
Press the [VOL] knob for at least 1 second.
3 Select the Audio Setup item to adjust
Press the [VOL] knob.
Each time you press the knob, the item to be
adjusted alternates between the items shown in
the table below.
4 Setup the Audio item
Turn the [VOL] knob.
Adjustment Item Display Range
Volume offset "VOLUME OFFSET" –8 — 0
Dual Zone System "2ZONE" ON/OFF
• Volume offset: Sets each source’s volume as a
difference from the basic volume.
• Dual Zone System
Main source and sub source (Auxiliary input) output
Front channel and Rear channel separately.
- Set up the channel of sub source by <Dual Zone
System Setting> (page 43).
- Select Main source by [SRC] button.
- Adjust the volume of Front channel by [VOL] knob.
- Adjust the volume of Rear channel by <Audio
Control> (page 10).
- The Audio Control has no effect on sub source.
• You can use the Dual Zone System with the Auxiliary
input sources listed below.
- Internal auxiliary input
• You can use the Dual Zone System only when you
have set the rear speaker to any mode other than
"None" in the <Sound Management system> (page
13).
• When the "2ZONE" is ON, ignore the following setups.
- <Sound Field Control> (page 12)
- <Sound Management system> (page 13)
- <Equalizer Control> (page 14)
- <WOW Control> (page 15)
- <Bypass Control> (page 16)
• ODD D/A System is not effective when the "2ZONE" is
ON.
5 Exit Audio Setup mode
Press the [VOL] knob for at least 1 second.