Xerox 2045e appendix the interface cable, Network connection, Problem, Solutions, Windows 95/98/Me

4

30

Troubleshooting

Problem		Solutions
Is the Data In indicator	If not, data is not being sent to the machine.
blinking or lit after starting	❖ When the machine is connected to the computer using
the print job?
	the interface cable
	Check the machine port settings are correct. For parallel port
	connection, port LPT1 or LPT2 should be set.
	•	Windows 95/98/Me
		A Click the [Start] button, point to [Settings], and then click
		[Printers].
		B Click the icon of the machine. On the [File] menu, click
		[Properties].
		C Click the [Details] tab.
		D In the [Print to the following port(s)] list, confirm the correct
		port is selected.
	•	Windows 2000
		A Click the [Start] button, point to [Settings], and then click
		[Printers].
		B Click the icon of the machine. On the [File] menu, click
		[Properties].
		C Click the [Ports] tab.
		D In the [Print to the following port(s)] list, confirm the correct
		port is selected.
	•	Windows XP Professional
		A Click the [Start] button, and then click [Printers and Faxes].
		B Click the icon of the machine. On the [File] menu, click
		[Properties].
		C Click the [Ports] tab.
		D In the [Print to the following port(s)] list, confirm the correct
		port is selected.
	• Windows XP Home Edition
		A Click the [Start] button, click [Control Panel], click [Print-
		ers and Other Hardware], and then click [Printers and Faxes].
		B Click the icon of the machine. On the [File] menu, click
		[Properties].
		C Click the [Ports] tab.
		D In the [Print to the following port(s)] list, confirm the correct
		port is selected.
	•	Windows NT 4.0
		A Click the [Start] button, point to [Settings], and then click
		[Printers].
		B Click the icon of the machine. On the [File] menu, click
		[Properties].
		C Click the [Ports] tab.
		D In the [Print to the following port(s)] list, confirm the correct
		port is selected.
	❖ Network connection
	Contact your network administrator.