Xerox 2045e appendix Messages/Second messages, Causes, Solutions, capacity on the Change Acces

Troubleshooting

	Messages/Second messages	Causes	Solutions
	NV-RAM has a problem.	An error has occurred in the	Turn off the main power
		optional memory unit.	switch, and back on again. If
			the message appears again,
			call your sales or service repre-
			sentative.
	Output tray has been	The output tray has been	Select the correct output tray.
	changed.	changed because of the paper
		size limitation of the selected
		tray.
	Paper in duplex unit. Open	There is a misfeed in the du-	Open the cover of the duplex
	cover and remove paper.	plex unit.	unit, and remove the misfed
			paper.
	Paper in staple tray. Open fin-	There is paper remaining in-	Open the cover of the finisher,
4
	isher cover and remove pa-	side the finisher.	and remove the paper.
	per.
	Parallel I/F board has a prob-	An error has occurred in the	Contact your sales or service
	lem.	parallel interface board.	representative.
	Print overrun.	The image data has been	Increase memory capacity.
		thinned out due to image com-	When installing a memory
		pression.	module in the machine, con-
			tact your sales or service rep-
			resentative.
	Problems with the wireless	An error may have occurred in	Turn off the main power
	board.	the IEEE 802.11b card (wire-	switch, and back on again. If
		less LAN board).	the message appears again,
			contact your sales or service
	Problems with the wireless	An error may have occurred in
			representative.
	card.	the IEEE 802.11b card.
	Punch has been cancelled.	Punch has been cancelled.	Check the paper feed direc-
			tion, paper orientation, and
			punch position.
	RPCS graphic error.	There is insufficient graphics	Specify the correct memory
		memory to print the data.	capacity on the [Change Acces-
			sories...] option in the RPCS™
			printer driver.
			To print the image correctly,
			install more memory in the
			machine, or reduce image res-
			olution.
	RPCS memory overflow.	A memory overflow occurred	To print the image correctly,
		during the print job. After part	install more memory in the
		of the data is printed, the print	machine, or reduce image res-
		job is suspended.	olution.

26