Printer Features

Letterhead Setting

You can rotate original images when printing.

When printing, original images are always rotated by 180 degrees. Therefore, output might not be as expected when printing onto let- terhead or preprinted paper re- quiring orientation. Using this function, you can specify image ro- tation.

Off

Auto Detect

On (Always)

 

Note

5

Default: Off

When set to Off, original images

are rotated by 180 degrees.

When set to Auto Detect, the machine detects a letterhead or preprinted paper automatically, and does not rotate them.

When set to On (Always), the machine does not rotate.

This function reduces printing speed.

Default Printer Language

You can set the default printer lan- guage if the machine cannot find the printer language automatical- ly.

PCL

PS

Note

Default: PCL

PS appears only when the op- tional PostScript 3 board is in- stalled.

Host Interface

I/O Buffer

You can set the size of the I/O Buffer. Normally it is not neces- sary to change this setting.

128 KB

256 KB

512 KB

Note

Default: 128 KB

Edge to Edge Print

Select this to maximize the printa- ble area by minimizing white space along the edges, to 0.04 inch- es (1 mm).

Off

On

Note

Default: Off

I/O Timeout

You can set how many seconds the machine should wait before end- ing a print job. If data from another port usually arrives in the middle of a print job, you should increase this timeout period.

10 seconds

15 seconds

20 seconds

25 seconds

60 seconds

Note

Default: 15 seconds

44

Page 48
Image 48
Xerox 2045e appendix Host Interface