Xerox 2045e appendix Staple printing will be canceled under the following conditions

Staple
❒ Staple printing will be canceled under the following conditions:
• If the number of staple jobs exceeds maximum. For information about the
maximum number, see “Specifications”, General Settings Guide.
• If a paper size that cannot be stapled is selected. For information about pa-
per sizes that can be stapled, see “Specifications”, General Settings Guide.
• If a paper type that cannot be stapled is selected.
The paper types that can be stapled are plain and recycled. Labels, thick
paper and OHP transparencies cannot be stapled.
• If positions other than those fixed for stapling are specified.
• If there are inconsistencies between the orientation in duplex mode and the
staple position.
• If paper sizes are mixed when a different paper size is specified during a
print job.
• When staples have run out.
• When feeding paper from the bypass tray.
• When staples have run out and Auto Continue is set, printing will continue
without stapling after the message has been displayed.
❒ When using the optional booklet finisher to select [2 at Center], the print job
	6
will be canceled if the staples run out.

❒Paper sizes that can be stapled when using the Mixed Size mode are as fol- lows:

•A3 L and A4 K

•B4 L and B5 K

•11" ⋅ 17"L and 8 1 /2" ⋅ 11"K

51