— 6 —
English
Handling Discs
Playing a Disc that is dirty,scratched
or warped can cause the sound to
skip and the unit to operate
incorrectly,resulting in worsened
sound quality.Take the following
precautions to prevent your Discs
from getting scratched or damaged.
Handling Discs
•Do not touch the recorded side of the Disc
(i.e., the side opposite the label) when
holding it.
•Do not stick tape on either side of the disc.
Storing Discs
•Do not store discs in areas exposed to
direct sunlight – such as a car seat or
above the fascia panel (dashboard) – or
other hot places.
•Remove discs from the unit when not
listening to them for a whilst, and put
them back in their cases. Do not stack
discs that have been removed from their
cases or prop them against something.
Cleaning Discs
If a disc has become dirty, wipe it off gently
using a commercially available cleaning cloth
or a soft cotton cloth, starting from the
centre of the disc and moving outward. Do
not clean discs with conventional record
cleaners, anti- static formulas, or chemicals
such as paint thinner or benzene.
Checking New Discs for Burrs
When playing a new disc for the first time,
check that there are not any burrs stuck to
the perimeter of the disc or in the central
hole. discs with burrs stuck on them may
not load properly or may skip whilst playing.
Remove burrs using a ballpoint pen or a
similar utensil.
Tape
Burrs
Burrs