Kenwood Z920DVD Installation, Removing the hard rubber frame

— 69 —

Make sure that the unit is installed securely in place. If the unit

is unstable, it may malfunction (eg, the sound may skip).

NOTE

Bend the tabs of the

mounting sleeve with

a screwdriver or

similar utensil and

attach it in place.

Metal mounting

strap

(commercially

available)

Self-tapping

screw

(commercially

available)

Firewall or metal support

Screw (M4X8)

(commercially

available)

Installation

■

Installation

Removing the hard rubber frame

■

When the lower level is removed, remove the upper two

locations.

2

The frame can be removed from the top side in the same

manner.

NOTE

Catch

Lock

Engage the catch pins on the removal tool and remove the

two locks on the lower level.

Lower the frame and pull it forward as shown in the figure.

1

Accessory2Removal tool

Optical cable (Provided with the KDS-P901)

When handling an optical cable for

wiring, use care not to exceed the

minimum cable bend radius of 30

mm. If you exceed the minimum

bend limit, optical fibers within the

optical cable may be damaged.

When installing the DVD receiver

unit on the vehicle, ensure that the

optical cable is not stuck between

the DVD receiver unit and vehicle

parts.

2CAUTION

Contents

Main Z920DVD DVD-RECEIVER INSTRUCTION MANUAL Contents Audio effect control features Tuner features RDS features DVD/VCD/CD player features Safety precautions External disc control features Menu settings Basic Operations of remote control................61 Installation Safety precautions Reset button To prevent damage to the machine, take the following precautions: IMPORTANT INFORMATION About the disc changer to be connected: Cleaning the Faceplate Terminals CLASS 1 LASER PRODUCT Handling Discs Page Before Use Use PAL discs in this player. The Z920DVD will playback any disc whose region number is (or ). Restrictions due to difference between discs Glossary DVD:Digital Versatile Disc VIDEO CD (VCD) ALL MPEG: Moving Picture Expert Group (DVD,VCD) Dolby Digital DTS Top menu/menu (DVD) Title number (DVD) Volume Power LOUD indicator Increasing Volume: Decreasing Volume: Switching Modes Switching Modes: Selecting the standby mode: Turning Attenuator On/Off: Attenuator Switching the Upper Part Display Switching Display Mode In Tuner mode: Displaying Frequencies: Changing the Display Mode: In External disc control mode: In DVD mode: Switching the Lower Part Display In VCD/CD mode: In External disc control mode: In Tuner mode: Switching Full-Screen Display In AUX mode: Page Reattaching the Faceplate: Setting value Switching the Preset Sound Setting: System Q Speaker Setting Non-Fading Output Turning non-fading output On/Off : Audio Control Setting: 4.Bass Extend 2.Bass Level 3.Bass Quality Factor 1.Bass Centre Frequency Page Crossover Network Control Setting: Spatializer Function Setting: 4.Phase for Non-Fading Output 2.High-pass Filter Frequency for Rear Output 3.Low-pass Filter Frequency for Non-Fading Output Turning the Spatializerfunction Off: Dual Zone System Audio Control Setting: Adjust each mode Crossover Network Control Setting: 1.High-pass Filter for Front Output 2.Delay Time for the Front Right Speaker 4.High-pass Filter for Rear Output 3.Delay Time for the Front Left Speaker 7.Low-pass Filter for Sub Woofer Output 8.Delay Time for the Sub Woofer 6.Delay Time for the Rear Left Speaker 9.High-pass Filter for Centre Output <When the KDS-P901 is connected> Surround Processor Control Setting: Adjusting the Centre Frequency: Adjusting the Gain: 5.Using the DOLBY PRO LOGIC Adjusting the Quality Factor: 2.Parametric Equalizer 6.Selecting the Acoustic Image 7.Turning the Centre Output On/Off 9.Turning the Sub Woofer Output On/Off 8.Selecting the Multi Channel 10.Setting the Channel Balance Tuning Tuner features ST indicator Preset station number Band display Frequency by setting the Lower Part Display (page 14) to "... + Function indicator." Tuner features by setting the Lower Part Display (page 14) to "... + Function indicator." TI indicator Alarm RDS (Radio Data System) Enhanced Other Network Programme Service name Radio text Presetting Volume for Traffic Information/News Traffic Information Function Programme Type (PTY) Function Select the type of programme to be received Turning TI function On/Off: Speech (All Speech) Music (All Music) Music Speech Music Speech Page Page DVD/VCD/CD control features Playing DVDs/VCDs/CDs: Playing DVDs/VCDs/CDs Already Inserted: Pausing and Restarting DISC Play: Eject: Chapter Search (DVD) Making a Forward Search Pausing and Restarting Disc Play Making a Reverse Search Track Search (VCD, CD) Setting the Priority Language for Voice Selecting to the DVD Setup Menu 5/ Returning to the Previous menu Ending in the Setup menu Page Page List of language codes Setting the Rating Level (parental lock) Setting the password: Setting the Parental Level: To change the password: Page Page Setting the Zoom Setup Sets the reference point when zooming. Disc number Disc title/Track title/DNPS Sets the scroll amount. Playing Other Disc mode Playing Discs: Track Search Pausing and Restarting Disc Play: Fast Forwarding Disc Play: Disc Search Track Scan Making a Reverse Disc Search: Random Play Making a Forward Disc Search: Magazine Random Play Function of disc changers) Presetting Disc Names (DNPS) To scroll manually: To scroll automatically: Page Page Menu System Menu display NEWS indicator LOUD indicator RDS indicator Enter the menu mode 7 Code Security Function <In Standby mode> If you press the RESET button or remove the battery: 5 6 Page Page Page External Amp Control System Q Selecting Tuning Mode <In Tuner mode> Local Seek Function <In Tuner mode> News Bulletin Function with PTY News Timeout Setting Auto Memory Entry <In Tuner mode> AF (Alternative Frequency ) Function Restricting RDS Region (Region Restrict Function) Monaural Reception <In FM reception of Tuner mode> Power OFF Timer Auto TP Seek Function Built-in AUX Control Text Scroll ABCDE DVD mode JKL FGHIE CD mode Loading and Replacing the Batteries for the Remote 3Frame-by-frame playback (DVD/VCD) DVD/VCD/CD Control Function < DVD position > Cancelling the frame-by-frame playback 3Stopping playback 3Switching the Menu Screen (DVD) Page Page Page 67 67 Connecting Cables to Terminals Connector A Connector B AB Connecting Cables to Terminals Connector Function Guide Installation Removing the hard rubber frame Installation Removing the Unit Screwing the Faceplate on the Unit Installation for Amplifier unit Page DVD/VCD/CD control mode SOLUTION POSSIBLE CAUSEPROBLEM External disc control mode If the following situations,consult your nearest service centre: Page FM tuner section MW tuner section LW tuner section DVD player section Audio section