Hood Cleaning
Be sure lights are cool before cleaning the hood.
Figure 8 |
To Clean Filters
•The metal grease filters will last forever. They are made of anodized aluminum
•It is recommended that the filters be washed at least once a month; they can be washed by hand or in the dishwasher.
•Drain water through edge holes and let each filter dry thoroughly before replacing it.
To Remove The Metal Grease Filters
•Turn blower and lights off.
•Push simultaneously the two grease filter handles first upwards, then pull towards the center and extract the filters Figure 8.
•To reinstall, reverse procedure.
To Clean Hood Surface
•For general care, wipe the outside of the white or black hood with sudsy water or general kitchen household cleaners, rinse well and dry with clean soft cloth to avoid water marks.
•Do not use abrasive products.
Lights replacement
R |
Q |
G |
Figure 9 |
NOTE: Turn blower and lights off. Make sure the lights are cool. If new lights do not operate be sure lights are inserted correctly before calling service.
•Remove the light shield Q by pushing simultaneously the two unlocking buttons R (Figure 9); for safety reasons make sure to remove the light shield from its suspension slides G.
Attention: When removing, handle the light shield by the glass.
•Pull out fluorescent tube and replace with Philips Type
•Refit the light shield.
8
