WARNING! Do Not Sit In Chair
Until Stabilizer Bolt is secured.
2544 20” FOLDING ADIRONDACK CHAIR
Contents:
20” Folding Adirondack Chair
(2) | Size | |
(2) Washers | Locknut Washer Stabilizer Bolt | |
(2) | Lock Nuts |
|
Tools Required:
7/16” Wrench
#3 Phillips Head Screwdriver
1.
Unfold chair to align predrilled holes so you can insert and secure stabilizer bolt.
UNSEATED
Folding Mechanism
2.Secure folding mechanism forward into stationary position with chair in upright position.
3.
a. Align the predrilled holes and insert the 1/4 - 20 x 2” Bolt through seat and arm post then clean any plastic residue from the bolt.
b. Slide the washer onto the end of the bolt.
c. Slide the locknut onto the bolt and tighten the nut.
Repeat on the other side.
3a. | 3. |
Copyright © Kettler USA 309.01 |
|
Folded Adirondack Chair |
2.
Properly SEATED
Place fold mechanism Folding Mechanism in forward position
3b.
3c. Properly Seated
Washer and Nut.
Made in the U.S.A. www.kettlerusa.com info@kettlerusa.com
