Kettler manual 2577 18” Square Side Table, Assembly Instructions, Contents, Tool Required

Repeat on the other leg.

2577 18” Square Side Table

Contents:		Tool Required:
(2)	Legs	#3 Phillips Head
(1)	Center Brace	Screwdriver
(1) Table Top
(6)	1/4 - 20 x 2” Bolts

Assembly Instructions

1.Place leg inside the frame underneath the table top aligning the predrilled holes. Insert two 1/4-20 x 2” bolts then tighten them with the phillips screwdriver. Repeat on the other side.

2. Place the center support brace vertically between the legs aligning the predrilled holes. Insert a 1/4-20 x 2” bolt thru the hole into the center brace then tighten it with the phillips screwdriver.

2.

1.

Copyright © Kettler USA 309.01

Aligning the predrilled holes on the leg with and metal insert on the frame insert the bolt.

Made in the U.S.A. www.kettlerusa.com info@kettlerusa.com