and other electrical appliances form an electro-magnetic field around them, which may also cause problems in heart rate measurement.

PAUSE FUNCTION:

When STOP button is pressed during workout, program is suspended. Message center will flash “WORKOUT PAUSED”. After the running belt has come to a complete stop, dot matrix display window will count down from 3:00. During pause mode, only START and STOP buttons will function.

If START is pressed within three minutes during the pause mode, treadmill will bring the running belt movement back to the speed at which the treadmill was paused. Workout values will resume counting and continue where it was left off.

If STOP is pressed during the pause mode, program will end. After three minutes if no button is pressed, treadmill will automatically end the workout program.

END OF WORKOUT STATS:

When you have completed your workout or if you have ended your workout, the display will report your workout stats. After the running belt has come to a complete stop, the message center will display total time, total distance, total calories and average speed twice. Then the display will go to idle mode, ready for the next user workout setup. If you wish to skip the workout stats report, simply press the STOP button, which will skip display to the idle mode.

UNIT CONVERSION:

To change from metric to English or English to metric, you must be in the idle mode, where the dot matrix window displays a flashing heart. Follow the steps below to make the unit conversion.

1.Simultaneously press both the STOP and SLOW buttons together.

2.The message center will show Km to Mi or Mi to Km.

3.Simply press START to confirm.

Notice that the LED light next to the distance display window on the upper right corner will have changed the measurement unit accordingly.

PRESET PROGRAMS:

QUICK START:

QUICK START

Once the power switch is turned on, and the safety key is secured in place, simply press the

Once the power is on

QUICK START button.

Treadmill will activate at 1.0 Km/H. You may increase or decrease

Owner’s Manual

21

and the safety tether key is secured in place, simply press

the START button,