Keurig B150 fig. 4 Ready to Brew Your First Cup, The LCD Display will be in its idle state fig

fig. 4 Ready to Brew Your First Cup

12:30 PM	WATER
	LEVEL

Ready

Choose Your

K-Cup®&

Lift Handle

Español Français

fig. 5

1.The LCD Display will be in its idle state (fig. 4).

2.Lift the Handle. The K-Cup®Holder will open toward you (fig. 5).

3. Select a K-Cup portion pack.

NOTE: Do not remove the foil lid or puncture the K-Cup.

4.Place a K-Cup portion pack in the K-Cup Holder (fig. 6).

CAUTION: There are two sharp needles that puncture the K-Cup, one above the K-Cup Holder and the other in the bottom of the K-Cup Holder. To avoid risk of injury, do not put your fingers in the K-Cup Assembly Housing.

5.Lower the Handle to close the Lid over the K-Cup Holder. (When it is closed completely, the BREW Button will flash up to 60 seconds.)

6.Place a mug on the drip tray and select

your brew size (fig. 7), then press BREW (fig. 8). NOTE: If you do not press BREW within 60 seconds the Brewer will return to its idle state and the Brew Button will cease to flash to prevent accidental activation. Re-activate by raising the handle fully and then closing it.

fig. 6

fig. 7

Select

Brew Size

	4 OZ.
6 OZ.	8 OZ.
10 OZ.	12 OZ.

7.There may be a short pause prior to coffee being dispensed. The entire brew process lasts for approximately 1 minute and ends with a burst of air to remove all liquid from the K-Cup.

CAUTION: There is extremely hot water in the K-Cup Holder during the brew process. To avoid risk of injury, do not lift the Handle or open the K-Cup Assembly Housing during the brew process.

8.The end of brew is indicated by “KEURIG BREWED ENJOY”.

9.Lift the Handle, remove and dispose of the used K-Cup.

CAUTION: K-Cup will be hot.

10.Enjoy your first cup of Keurig Brewed® gourmet coffee, tea or hot cocoa!

11.Your Brewer may display “HEATING PLEASE WAIT” as it heats water for the

next brew cycle.

fig. 8

7