2.Join the coin changer cabinet to platform by placing the ‘hooks’ inside the platform slot. See figures 4 and 5 below.

DETENTS

FOR

BREWER

FEET

Figure 5

Figure 4

Figure 5

 

3.Place brewer on the platform such that the rubber feet of the brewer fit into the detent areas on the platform and the brewer rests on top of the coin changer cabinet protrusions. See figure 6 below.

Figure 6

4.At the rear of the assembled brewer-coin changer cabinet locate the five holes for mounting the Brewer-cabinet plate. Remove the five screws from the plastic accessory bag. See figure 7 below.

Figure 7

B3000 SERVICE MANUAL

 

60-200807-000, REV C

75