9.Connect the console (65) to the heart rate wires and computer wire from the handlebar post. Secure with screws (66).
9
65
66
57
10
9a. Get the tension cable (55) out of the handlebar post’s hole, and connect it to the tension controller (57) as in steps
Step 1: Put the cable end into the spring hook.
Step 2: Pull the knob up into the bracket.
Step 3: Insert the knob into the handlebar post, and secure with the screw attached. Tension is increased by turning the knob clockwise.
Steps 1-3
9a
Important
This product is designed for use by adults. Precautions must be taken to prevent children from using or playing with this exercise bike. This bike must be used on a level surface at all times. Do not pedal backwards as this will damage the computer, cable and drive
and void the warranty. | 11 |
|
