Programmable Training Computer
FUNCTION BUTTON
START/STOP To start or stop monitor counting.
Press to select functions between time, pulse, distance, and calorie.
To adjust and set all functions, and training programs setting.
To have the monitor jump to initial display for training mode selection. If you hold on pressing the button for 2 seconds, the monitor will reset previous training as a new start.
The monitor will calculate and display the time duration of climbed elevation of 500m that you have worked out.
The monitor will calculate and display the climbed elevation per minute.
**C.R. and C/Min M will switch display to each other on the same field in every
6 seconds.
Count up - To accumulate training time from 0:00 to 99:59 with one second increment when the
training starts.(No preset target)
Count down - The monitor will start to count from preset time down to 0:00 with one second decrement when the training starts. As soon as the preset time is achieved, the monitor starts
to alarm, and TIME will start to count up immediately from 0:00.
Count up - To accumulate the climbed elevation from 0 to 9999 m with 10 m increment when the training starts. (No preset target elevation climbed)
Count down - The monitor will start to count from preset elevation down to 0 with 10 m (or ml) decrement when the training starts. As soon as the preset target is achieved, the monitor starts to alarm, and ELEV. CLIMBED will start to count up immediately from 0.
Count up - To accumulate calories consumption from 0 to 9999 cal with one cal increment when when the training starts. (No preset target)
Count down - The monitor starts to count from preset calories down to 0 with 1 cal decrement when the training starts. As soon as the preset calories is achieved, the monitor starts to alarm, and CALORIES will start to count up immediately from 0.
