Keys Fitness HT-760T owner manual Program Operation, Program Mode

Console Instructions

PROGRAM OPERATION

QUICK START / MANUAL MODE (P1)

1.Plug into a surge protector outlet. Attach the Safety Key to the treadmill console.

2.Stand on the treadmill and straddle belt. Attach safety key clip to your clothes.

3.Press POWER button. There will be an eight (8) second delay after pressing the POWER but- ton before data can be entered.

4.Press START/STOP button. Belt will begin to move after 4 seconds. Step on belt slowly after the belt starts moving. Speed or incline may be adjusted by using the appropriate + (increase) or – (decrease) button.

5.To end your workout, press START/STOP button. Belt will gradually slow to zero.

6.To pause your workout, press PAUSE.

7.To re-start after pausing: Press the PAUSE button. WARNING: THE TREADMILL BELT

WILL RESUME AT THE SPEED THE TREADMILL WAS MOVING BEFORE PAUSING.

PROGRAM MODE

Plug treadmill into a surge protector outlet. Attach the Safety Key on to the treadmill console.

1.Stand on the treadmill and straddle belt. Attach safety key clip to your clothes.

2.Press POWER button. There will be an eight (8) second delay before data can be entered.

3.There are thirteen (13) pre-set and two (2) user profile programs. Refer to the following pages for program overview that includes Speed and Incline setting for each program. Press the PROGRAM UP or DOWN button to select which program you wish to use. Press ENTER to

confirm selection.

13