G
www.keysfitness.com
5
E3
Use Tool
ASSEMBLY FOR CONSOLE
E2
6mm
E
M1
M3
N14
M2
Step 1:
Connect the sensor wire (E3) and the pulse wire (E2) with the corresponding wires on the console (G).
Step 2:
Remove 2 screws (N14) from the back of the console (G).
Step 3:
Gently push all wires into the upright post and mount the console (G) by sliding it onto the console mounting plate at the top of the upright tube (E). Secure with 2 screws (N14) to keep the console in place.
ASSEMBLY FOR WATER BOTTLE
Step 1:
Remove 2 screws (M2) from the upright post (E).
Step 2:
Install water bottle holder (M1) on the upright post and secure it using 2 screws (M2). Place the water bottle (M3) into the water bottle holder (M1).
Assembly 11
