www.keysfitness.com
Use Tool
B
ASSEMBLY FOR FRONT STABILIZER
A10
Secure the front stabilizer (C) to the main frame (A) using 2 allen screws (N7), 2 spring washers (N2) and 2 flat washers (N3)
B20
ASSEMBLY FOR FRONT & REAR MAIN FRAME
Step 1:
Connect the front (A10) and rear (B20) pulse wires together.
Step 2:
Attach front (A) and rear (B) main frames together, making sure all wires are lined up correctly so that they are not pinched when assembling the two frames together. Then, secure the frame connection at the top and the 2 sides using 4 allen screws (N1), 4 spring washers (N2) and 4 flat washers (N3).
Note:
After you finish the assembly for front and rear stabilizer bars in order to add stability to the unit, you may need to adjust the levelers that are located on the bottom of the unit.
8 Assembly
6mm
N1 | A |
|
N2
N3
N7
C
N2
N3
