SCREW ST4.2*13
6MM
TOOL
www.keysfitness.com
4
ASSEMBLY FOR FENDERS
Step 1:
Lift up the base of the treadmill until the pop pin located on the left side engages.
Step 2:
On the outer part of the fenders, secure the right and left fenders with 2 phillips screws M6*30 and 2 flat washers M6*12*1.6 mm.
Step 3:
On the inner part of the fender secure the right and left fenders with 2 phillips screws M6*20 and 2 flat washers M6*12*1.6.
WASHER 6.6* 12*1.6MM
PHILLIPS SCREW M6*20
PHILLIPS SCREW M6*30
ASSEMBLY FOR END CAPS
In the treadmill’s folded position, secure the end caps with screws ST 4.2*13 (Qty 4).
