ASSEMBLY
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
STEP 5 | Connect Back Pad (8) to Back Pad Support Frame (5) using Bolts (17) |
| and Washers (18). Connect Back Pad Support Frame (5) to Main |
| Frame (1) using Bolt (12), Washers (13 ) and Nylon Lock Nut (14). |
STEP 6 | Connect Adjustable Back Pad Frame (6) to Back Pad Support Frame |
| (5) using Bolt (12), Washers (13) and Nylon Lock Nut (14). Slide Bolt |
| (12) through Adjustable Back Pad Frame (6) and Plastic Sleeve (7) - |
| secure with Washers (13) and Nylon Lock Nut (14). |
STEP 7 | Slide Roller Pad Tube (31) into Leg Support (29). Place Upholstered |
| Roller Pad (32) on each side of Roller Pad Tube (31) - secure with Big |
| Plugs (33). Attach Leg Support (29) to Main Frame (1) using L Pin |
| (34). |
