6
Oven Control, Clock and Timer Features and Settings

BAKE/TEMP RECALL Pad

Touch this pad to select the bake function.

BAKE Light

Flashes while in edit mode—you can
change the oven temperature at this point.
Glows when the oven is in bake mode.

START/ON Pad

Must be touched to start any cooking
function.

Display

Shows the time of day, oven temperature
and whether the oven is in the bake or broil
mode. The display will show PRE while
preheating. When the oven reaches the
selected temperature, the oven control will
beep and the display will show the oven
temperature.
If “F– and a number or letter” flash in the display and the
oven control signals, this indicates a function error code.
The time of day will flash in the display when there has
been a power outage. Reset the clock.
Touch the CLEAR/OFF pad. Allow the oven to cool for
one hour. Put the oven back into operation. If the function
error code repeats, disconnect the power to the range and
call for service.

KITCHEN TIMER ON/OFF Pad

Touch this pad to select the timer feature.
Then press +and pads to adjust time.

TIMER Light

Flashes while in edit mode—you can
change the set time at this point. Glows
when the timer has been activated. Flashes
again when the time has run out until the
control is reset.

CLOCK Pad

To set the clock, press this pad twice and
then press the +and pads. The time of
day will flash in the display when the oven
is first turned on.

Throughout this manual, features and appearance may vary from your model.

Using the oven controls.
Safety Instructions
Operating Instructions
Care and CleaningTroubleshooting TipsConsumer Support