ge.com
19
Safety Instructions Operating Instructions Care and Cleaning Troubleshooting Tips Consumer Support
Problem Possible Causes What To Do
Oven temperature too Oven thermostat •See the Adjust the oven thermostat—Do it yourself!
hot or too cold needs adjustment. section.
Oven will not work Plug on range is not •Make sure electrical plug is plugged into a live,
completely inserted in properly grounded outlet.
the electrical outlet.
A fuse in your home may •Replace the fuse or reset the circuit breaker.
be blown or the circuit
breaker tripped.
Oven controls improperly set. •See the Using the oven section.
Storage drawer Rear drawer support is •Reposition the drawer. See the Storage Drawer
is crooked on top of the guide rail. Removal instructions in the Care and cleaning of your
range section.
Storage drawer Power cord may be •Reposition the drawer and power cord. See the
won’t close obstructing drawer Storage Drawer Removal instructions in the Care and
in the lower back cleaning of your range section.
of the range.
Rear drawer support is •Reposition the drawer. See the Storage Drawer
on top of the guide rail. Removal instructions in the Care and cleaning of your
range section.
“Crackling” or This is the sound of the •This is normal.
“popping” sound metal heating and cooling
during the cooking functions.
“F – and a number You have a function •Press the CLEAR/OFF pad. Put the oven back into
or letter” flash er ror code. operation.
in the display If the function code repeats. •Disconnect all power to the range for at least 30
seconds and then reconnect power. If the function
error code repeats, call for service.
Display flashes “bAd” The installed connection •Contact installer or electrician to correct miswire.
then “linE” with a from the house to the unit
loud tone is miswired.
Display goes blank A fuse in your home may be •Replace the fuse or reset the circuit breaker.
blown or the circuit
breaker tripped.
The clock is turned off from •See the Using the clock and timer section.
showing in the display.
Display flashes Power failure. •Reset the clock.
Unable to get the Oven control pads were •The BAKE and BROIL HI/LO pads must be pressed
display to show “SF” not pressed properly. at the same time and held for 3 seconds.
Power outage, Power outage or surge. •Reset the clock. If the oven was in use, you must reset
clock flashes it by pressing the CLEAR/OFF pad, setting the clock
and resetting any cooking function.