Assembly
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
Attach Seats (2) to the two Seat Supports (15) using four Washers (B2) and four Bolts (A5). Align the holes in the Seat Support (15) with the holes in the bracket that is welded to the main frame. Slide Seat Supports onto Main Frame.
Attach one Backrest Support (8) to the pivot rod welded to the Main Frame. Push two Bushings
(24)into the BackRest Support. Lift up the Backrest Support (8) to align the holes with the Backrest Adjust Bar (7). Attach with one Bolt (A2), two Washers (B1) and one Aircraft Nut (C1). Repeat for other side.
7
