Assembly
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
STEP 2
Attach the back of the Main Frame (#5) to the Cross Bar (#1) with two bolts M10X75 (#33), four D10 Washers (#35) and two M10 air- craft nuts (#36).
Insert the Front Base (#6) into the bottom of the Front Stand tube (#8), secure with a
Connect the Front Stand Tube (#8) to the Main Frame (#5) using two hex bolts M10X25 (#34), four D10 Washers (#35), and two M10 air- craft nuts (#36).
6
