![](/images/new-backgrounds/1182976/18297621x1.webp)
Assembly
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
STEP 5
Attach two Weight Plate Holders (#13) to the holes on the side of each Left and Right Supports (#6) &(#7). Secure each with a M10 x 20 Hex Bolt (#35) and Washer Dia10 (#39). Attach a Spring Clip 1”(#31) to each weight plate holder.
Insert the two Bar Catches (#15) into upper selected hole on the left and right Upright Beam. Insert the two Long Bar Catches (#17) into the bottomhole on the Left and Upright Beam.
11