Keys Fitness ST-PT Series owner manual Assembly Power Tower

Assembly of

Power Tower

REMOVE ALL SECURITY TAPE AND WRAPPING

BEFORE BEGINNING.

1.Hand tighten bolts. Do not use wrenches at this time.

•Slide rubber endcaps (11) onto each end of both base legs (5).

•Slide foam padding onto each push-up bar.

•Connect low cross support (34) to each base leg with two support plates (13).

1

2.Hand tighten bolts. Do not use wrenches at this time.

•Connect each upright support (3) to each base leg (5).

2

8 9