Assembly

Unpack all parts and place them in a clear area. Be sure to remove all packing material.

NOTE: Hand Tighten bolts and nylon nuts until machine is fully assembled.

STEP 1:

Attach Rear Upright (2) to Rear Base Frame (1) using Bolt (22), two Washers (28) and Nylon Lock Nut (26).

Connect the Front Upright (4) to the U Base Frame (5) using two Bolts (22), four Washers

(28)and two Nylon Lock Nuts

STEP 2:

Attach Cross Frame (3) to Rear

Upright (2) and Front Upright

(4)using four Bolts (19), eight Washers (27) and four Nylon Lock Nuts (25).

4

Page 4
Image 4
Keys Fitness ST-RC owner manual Assembly, Step