Kicker 10IX500.4 manual Ixsm, Performance, Model, Installation

IX.1-SERIES AMPLIFIERS Owner’s Manual IX500.4

Authorized KICKER Dealer:

Purchase Date:

Serial Number:

PERFORMANCE

Model:

RMS Power

@14.4V, 4Ω stereo, ≤ 1% THD+N

@14.4V, 2Ω stereo, ≤ 1% THD+N

@14.4V, 4Ω mono, ≤ 1% THD+N

Length

Height

Width

Frequency Response ± 1dB

Signal-to-noise Ratio

Input Sensitivity

Electronic Crossover

Bass Boost

Maximum Effi ciency (2Ω)

IX500.4

75W x 4

125W x 4

250W x 2

11-3/8” (288mm)

2-3/16” (55mm)

7-7/8” (200mm)

20Hz–20kHz

98dB, A-weighted, re: rated power

Low Level: 125mV–5V

High Level: 250mV–10V

Selectable HI/LO/OFF, Variable lo-pass 50–200Hz, 12dB/octave

Variable 0–18dB @ 40Hz

>80%

Pro Tip: To get the best performance from your new KICKER Amplifi er and extend the warranty by 1 year, use genuine KICKER accessories and wiring.

INSTALLATION

Mounting: Choose a structurally sound location to mount your KICKER amplifi er. Make sure there are no items behind the area where the screws will be driven. Choose a location that allows at least 4” (10cm) of open ventilation for the amplifi er. If possible, mount the amplifi er in the climate-controlled passenger compartment. Drill four holes using a 7/64” (3mm) bit and use the supplied #8 screws to mount the amplifi er. Use the IXSM mounting bracket (sold separately) to stack IX amplifi ers of different sizes.

IXSM

sold separately

2 IX AMPLIFIERS

2010 IX 500.4 RevB.indd 2

11/12/2009 2:16:38 PM