Kicker Features, Kicker Solo-Baric L7-SeriesSubwoofers, Recommended Applications Page

Features

yMica Filled Polypropylene with a Titanium Deposit Coated Cone An Ultra High Performance look that makes the Solo-Baric® L7 truly a statement piece. The cone gives you deeper and stronger bass at higher listening levels with less distortion due to less tendency to flex. Because, when a woofer cone flexes, there is a loss of out- put. This loss of output translates into less bass.

yRe-engineered rear cone brace In order to keep up with the demands on the cone at extreme listening levels, the rear brace has been re-designed and strengthened to reduce the cone flex. The brace works in conjunc- tion with the other components of the cone, to insure that cone flex does not decrease the output of the woofer.

yMassive Surround Radius High SPL=VMAX=Cone area + Xmax + surround radius. What does this mean? According to Dr. Koneairea, the Vmax of the driver takes into account the cone area as well as the Xmax of the driver. To increase the Xmax - the distance the cone can move in one direction - the surround must be large enough to handle the demands. Taking this into consideration, the new Solo-Baric L7 surround has been increased to handle the massive power needed for high SPL.

yOne Piece Front and Rear Gaskets Instead of using the cork gaskets, which can separate, the new L7’s have a one-piece gasket on both the front and rear of the mounting flange. It is more durable and ergonomically pleas- ing to the eye. The previous cork gaskets could tear off if you were transplanting the speaker into another box, or they could stay adhered to the old box causing you to order another gasket. These problems are eliminated with the new rubber gaskets. They not only look better, but also function better by eliminating the chance for air leaks.(provided the box is built correctly!) We still recommend if you are carpeting the box, to cut away any carpet that is under the woofer mounting flange to insure a tight seal.

ySSD (Spun Spoke Design) The basket not only looks impressive, but it is extremely functional. This cast alu- minum basket provides a solid foundation for the motor assembly insuring that all the parts work together in har- mony and prevent shifting or misalignment. Without a solid foundation, the speaker’s various parts could shift under extreme excursion causing premature failure and add unwanted noise to the music. If misaligned, the voice coilcould rub the inner wall of the motor structure and thus exposing the bare windings, which would cause speak- er failure. The same thing happens if the coil former rubs the pole-piece. The damaged former exposes the wind- ings causing speaker failure. When other speakers are pushed to their limits they tend to make noises that add col- oration to the music. When you’’re LIVIN’LOUD you only want to hear the music the artist intended you to hear, not a bunch of unwanted ringing.

yPerimeter Venting Without the perimeter venting along the side of the speaker, hot air would be trapped in with the voice coil. This will cause the structure to heat up quicker and cause power compression, which results in decreased output, as well as shorter speaker life. Perimeter venting causes a vortex cooling effect around the coil which exchanges the hot air around the voice coil for cooler air outside the speaker. It also releases pressure from under the spider to allow the speaker to work in a more linear fashion. All of this translates into cooler operating temperatures which will allow the speaker to sound and perform better.

Kicker Solo-Baric L7-Series Subwoofers

Recommended Applications

Page 2