Kicker L7 Front, Wedge Round Over Inner Corner Top, Box Building & Mounting Hints, Remember

Box Building & Mounting Hints

If you would like to use a vented enclosure, but the box designs we provide you with (in this manual) do not fit because of width or depth, the designs can be modified. The shape of the enclosure is not vital, but The Volume Is. The volume, of the design you choose, must stay the same. The following diagrams provide you with some help to insure your enclosure is built correctly.

Front

45° Wedge

Round Over

Inner Corner

Top

Remember:

If you are going to bend the port at 90° you will need to add 1/2 of the ports height to the length! See Below.

Example:

(Fig. 1)	Fig. 1		Fig. 2
Hport = 3”	3"	3"
Wport = 10”
	10"
Lport = 20”		10"
(Fig. 2)
Since Hport is 3” you need to add			L 2
1.5”( 1/2 of Hport) to Lport. This		20"
means that L1 + L2 = 21.5”		3"

Always measure L1 and L2 down

the center to get an accurateL 1 measurement!

Kicker Solo-Baric L7-Series Subwoofers

Recommended Applications

Page 15