Kicker S18X warranty 6SOLOXSUBWOOFER, RemovalMountingAssembly, InternationalWarranty

Wood Template

RemovalMountingAssembly (Continued)

Please follow these instruction to insure proper installation.

Use a jigsaw or router to cut the woofer cutout. Use a 7/16” (11mm) drill bit for the mounting holes. See Figure 11.

Note: The following steps require the assistance of another person.

					Figure 11
	Figure 12
						Enclosure Baffle
SPLAT		Insert the SPLAT into the cutout (inside the enclosure) and move it into
		position. See Figure 12.
WARRANTY		Use masking tape to temporarily		Enclosure Baffle
		hold the SPLAT in place inside
			the enclosure. This will be		SPLAT	Masking
		necessary for securing the BAM.
	Inside the					Tape
Enclosure		This tape can be removed after
					Inside the
	Enclosure
			the corner fastening
Baffle					Enclosure
			hardware has been installed.
			See Figure 13.			Figure 13
		Enclosure Baffle
Double-end		BAM	SPLAT
threaded			With the help of an assistant, insert the BAM and start
studs
			fastening the corner hardware. Remove the masking tape.
			Tighten the double-end threaded studs to secure the BAM
			to the enclosure baffle.			Figure 15
			See Figure 14.		SPAIR	Connect
Enclosure						Speaker
		Figure 14				Cable
Baffle
						Wires
Pull the speaker cable wires (used to connect the subwoofer to the
amplifier) through the BAM and connect them to the SPAIR’s
Binding Posts. The Locator Pin and Locator Hole will properly align
	Remove		the SPAIR to the BAM.			BAM
SPAIR	Gap Cap		See Figure 15. Locator Hole

Locator Pin

			Enclosure
			Baffle
	Remove the Gap Cap before
	inserting the SPAIR.	SPAIR	Enclosure
	See Figure 16.
			Baffle
BAM	Carefully insert the SPAIR back into
	the BAM; do not damage the voice
Figure 16	coil. The double-end threaded studs
Enclosure	and the ARCTIC (Aluminum Rapid
Baffle Cooling Thermal Induction Centering)
	Cap, located on the top of the	Double-end	BAM
extended pole piece of the SPAIR, will help to center the SPAIR as you
lower it into the BAM. When properly aligned these assemblies easily		threaded
		studs
	slide together. See Figure 17.
		Figure 17

6SOLOXSUBWOOFER

Figure 19

Fit the SPAIR to the BAM with the four (4) 1/4”-20 Acorn Head Nuts and washers, and the eight (8) Acorn Head Bolts. We have enclosed four (4) extra Acorn Head Bolts. See Figure 18.

Hand tighten the Acorn Head Nuts and Bolts in the order shown in Figure 19. Then use a wrench or socket driver to securely fasten the bolts. This will ensure a proper fit and alignment.

Figure 18

A Note on PowerHandlingCapacity SoloX subwoofers will handle massive amounts of power in any of the

recommended enclosures, minimum or maximum. The smaller enclosures are best for use in limited-space

applications. The larger recommended enclosures will yield more bass at the resonate frequency of the enclosure.

The listed Power Handling capacities assume that both voice coils are in use with the appropriate sub-sonic/resonate

frequency filter. Always connect both coils in a dual voice-coil speaker.

InternationalWarranty

Contact your International Kicker dealer or distributor concerning specific procedures for your country's warranty policies.

WARNING: KICKER products are capable of producing sound levels that can permanently damage your hearing! Turning up a system to a level that has audible distortion is more damaging to your ears than listening to an undistorted system at the same volume level. The threshold of pain is always an indicator that the sound level is too loud and may permanently damage your hearing. Please use common sense when controlling volume.

GARANTÍA INTERNACIONAL VersiónEspañol

Comuníquese con su concesionario o distribuidor Kicker internacional para obtener infor ación sobre procedimientos específicos relacionados con las normas de garantía de su país.

ADVERTENCIA: Los excitadores Kicker son capaces de producir niveles de sonido que pueden dañar permanentemente el oído. Subir el volumen del sistema hasta un nivel que produzca distorsión es más dañino para el oído que escuchar un sistema sin distorsión al mismo volumen. El dolor es siempre una indicación de que el sonido es muy fuerte y que puede dañar permanentemente el oído. Sea precavido cuando controle el volumen.

INTERNATIONALE GARANTIE	DeutscheVersion
Nehmen Sie mit Ihren internationalen Kicker-Fachhändler oder Vertrieb Kontakt auf, um Details über die
Garantieleistungen in Ihrem Land zu erfahren.		GARANTIE
WARNUNG: KICKER-Treiber können einen Schallpegel erzeugen, der zu permanenten Gehörschäden führen kann!
Wenn Sie ein System auf einen Pegel stellen, der hörbare Verzerrungen erzeugt, schadet das Ihren Ohren mehr, als ein
nicht verzerrtes System auf dem gleichen Lautstärkepegel. Die Schmerzschwelle ist immer eine Anzeige dafür, dass
der Schallpegel zu laut ist und zu permanenten Gehörschäden führen kann. Seien Sie bei der Lautstärkeeinstellung
bitte vernünftig!
GARANTIE INTERNATIONALE	VersionFrançaise

Pour connaître les procédures propres à la politique de garantie de votre pays, contactez votre revendeur ou distributeur International Kicker.

AVERTISSEMENT: Les haut-parleurs Kicker ont la capacité de produire des niveaux sonores pouvant endommager l'ouïe de façon irréversible ! L'augmentation du volume d'un système jusqu'à un niveau présentant une distorsion audible endommage davantage l'ouïe que l'écoute d'un système sans distorsion au même volume. Le seuil de la douleur est toujours le signe que le niveau sonore est trop élevé et risque d'endommager l'ouïe de façon irréversible. Réglez le volume en faisant prevue de bon sens !

P.O. Box 459 • Stillwater, Oklahoma 74076 • U.S.A. • (405) 624-8510 03062007+07SOLOX

7