Kicker VS10L7, VS12L7, VS12L5, VS10L5, VS8L5, VS8L7 Specifications, ter is recommended

(Mounting cont.)

Specifications

Model	Woofer	Imp.	Power	Top	Bottom	Height	Width
			Handling*	Depth	Depth
			(Watts)	(In., cm)	(In., cm)	(In., cm)	(In., cm)
VS8L5	S8L5	*2,4	300	8-1/2, 21.6	13-1/4, 33.7	11, 27.9	22-1/4, 56.5
VS8L7	S8L7	*2,4	325	8-1/2, 21.6	13-1/4, 33.7	11, 27.9	22-1/4, 56.5
VS10L5	S10L5	* 2,4	450	11-7/8, 30.2	17-1/4, 43.8	12-1/2, 31.7	27-3/4, 70.4
VS10L7	S10L7	* 2,4	525	11-7/8, 30.2	17-1/4, 43.8	12-1/2, 31.7	27-3/4, 70.4
VS12L5	S12L5	*2,4	600	12-1/2, 31.8	18-3/4, 47.6	14-5/8, 37.1	29, 73.6
VS12L7	S12L7	*2,4	750	12-1/2, 31.8	18-3/4, 47.6	14-5/8, 37.1	29, 73.6

NOTE:

*The two ohm unit should be used with the KX Series Class D amplifiers KX550.3, KX700.5, KX400.1, and KX600.1. It is not recommended for use with any KX two or four channel amplifiers.

The four ohm unit should be used with any KX Series two or four channel amplifier. It is not recommended for use with any KX Series Class D ampli- fiers.

The use of a subsonic filter will significantly increase the power handling. The power handling specifications listed in the chart above include the use of a 24 db/ octave subsonic filter. A minimum of 12dB/ octave subsonic fil-

ter is recommended. 3