Kicker ZK500 manual DigitalStereoSystem, ForZuneTM, Owner’sManual, DockingYourZuneDevice

Congratulations on your KICKER purchase

Please record your purchase

information and keep your sales receipt for validation of warranty.

	DigitalStereoSystem
	forZuneTM
	Owner’sManual
Model:	ZK500
Authorized Kicker Dealer:	_________________________
Purchase Date:	_________________________
Model Number:	ZK500
Serial Number:	_________________________

Figure 2		LCD
	Display		5” (127mm)
Rotary			Full-Range
Control			Drivers

Vibration

Isolation

Pad

Docking

Bay

3/4” (20mm)

Silk Dome

Tweeters

The Kicker zKICK ZK500 Stereo System for Zune is designed for livin’ loud with your Zune device in

the home environment. The ZK500 is fully featured with dual full-range 5” (`127mm) Kicker drivers and 3/4” (20mm) silk dome tweeters driven by a powerful amplifier with digital signal processing. The 6” (152mm) square passive radiator (subwoofer) on the back of the ZK500 balances the sonic output, adding the punchy low-frequency response that put Kicker subwoofers on the map. The rotary control and infrared remote allow simple, streamlined control of your ZK500 Stereo System. The ZK500 can be used with any existing Zune device. In addition, the ZK500 boasts a wide range of connectivity options including a composite video output, stereo RCA outputs, and an 1/8” stereo auxiliary input for incorporating additional audio/video devices with your ZK500 Stereo System.

DockingYourZuneDevice	Figure 1
The Zune Device should be mounted on the docking bay before
connecting any power cables to the Kicker Stereo System.
1. Choose the dock adapter that best fits your Zune
device. See the table below.
2. Attach the adapter to the ZK500’s docking bay.
3. Connect your Zune device to the ZK500’s dock
connector.
4. Plug the power cable into the DC input on the
back of the ZK500.
5. Plug the 2-prong electrical plug into a surge

	Skid Resistant/Non-Marking Feet	IR Remote
	Transport
Figure 3		Receiver
	Handle

Square

Passive

Radiator

INSTALLATION

INSTALLATION	protected electrical outlet.
	ZK500DockAdapter	ZuneDeviceModel
	1. A	Zune 30 Gb Digital Media Player
	2. B	Zune 80 Gb Digital Media Player
	3. C	Zune 4, 8 Gb Digital Media Player

Note: The ZK500 is compatible with Zune Firmware Version 1.4 and beyond. Before docking your Zune device to the ZK500 Stereo

System, update to the latest Zune firmware by syncing your Zune device to your Zune software and checking for the most recent updates.

Visit www.soundgate.com to learn more about Soundgate products designed for enjoying your Zune device in the mobile environment. Soundgate products offer a wide range of options for connecting your Zune device to your factory car stereo system.

Note: To prevent vibration during playback, use the enclosed vibration isotation pad as shown in Fig. 2.

2 ZK500STEREOSYSTEM

Composite	L	R	DC Power	1/8” Stereo
Video Out	Stereo RCA		22 Volts	Auxiliary Input
		Output

ImportantSafetyInstructions

Read and follow all the instructions listed in this manual. Follow all safety and procedural recommendations to prevent damage to your self, your Kicker product, or your portable entertainment device.

The ZK500 should not be used near water or in an environment where exposure to liquids is possible. This includes but
is not exclusive to areas where splashing, dripping, leaks, spills, and exposure to rain can occur. Liquid containers should
not be placed on or near the ZK500 Stereo System. The ZK500 Stereo System should not be cleaned with liquid
cleaners. Use only a dry cloth to clean the ZK500. Only use the ZK500 in areas with adequate open ventilation allowing
at least 4” of space on all sides of the ZK500. Do not set the ZK500 on any surface or cover the ZK500 with any object
that could impede the airflow to and from the ZK500 Stereo System. The ZK500 should not be placed near any source
of heat. This includes but is not limited to stoves, radiators, heating elements, electronic heat sources, and areas where
excessive solar heat can be generated. Do not install the ZK500 near any flame or place any flammable objects near the
device. The power outlet used to provide power to the ZK500 should be accessible at all times. The polarized 2-prong
electrical plug has a wide blade and narrow blade that should fit into the corresponding wide and narrow receiving
connections of your electrical outlet. Do not force the plug into the outlet. If the plug provided with the unit does not fit,
consult with an electrician to upgrade the electrical outlet accordingly. The power cord should be situated in a way that
protects it from being pinched, walked on, tripped over, or accidentally pulled from the electrical outlet or the electrical
input on the ZK500. Do not run the cable through doorways or underneath objects that could damage the wire or tear
the insulating material surrounding the wire. Only use the manufacturer supplied power supply with the ZK500. We
recommend using a surge protector/power conditioner and unplugging the ZK500 during any electrical storms or
situations that could cause voltage fluctuations in the electrical system.	3