Optional | 6” or | 12” | extensions | are available |
for larger | openings. | Only one | extension | |
recommended | per | gate. |
| |
If using gate on a stairway, it must be placed either on top stair or on lowest stair at bottom .
Push spindles A, B, C into three corners of gate. Note these spindles are pulled not screwed, into and out of their housings and occasionally may be tight.
Center gate in opening, with bottom rail resting on floor. Gaps on each side should be equal.
Insert step plate under bottom rail on desired side.
Release locking mechanism by pressing locking button in while lifting handle.
BUTTON MUST ALWAYS BE PRESSED IN WHEN LIFTING HANDLE. FAILURE TO DO SO WILL RESULT IN HANDLE MECHANISM BREAKING.
Pull out spindles A and B until they touch mounting surface . With walk - through door slightly open, tighten nuts toward gate frame as tightly as possible using wrench
provided. Each spindle adjusts individually and may be extended to varying lengths to allow for molding, uneven walls, etc.
Spindles may be extended a minimum of 1" but not more than 3 1/4" each side.
