Important. Gate must be installed in a structurally sound opening. Hinge side of gate must be mounted to a rigid surface.

Ensure mounting surface (wall, door frame, stairpost etc.) is strong, rigid and has an even surface.

If using gate on a stairway, it must be placed either on top stair or on lowest stair at the bottom .

Mounting Hinge Side

Screws provided are for mounting directly into wood. If mounting into brick, drywall or other surfaces, use appropriate hard- ware. If installing into hardwood

(i.e. oak), drilling a pilot hole may be necessary.

Hold template (a) against mounting surface, making sure end marked “1” is even with floor.

Mark 4 screw hole positions.

Remove template .

Using 2 wood screws (q) and only lower screw holes, mount hinge bottoms (b) with posts pointing up. Top screw holes will be used later.

Page 4
Image 4
Kidco G20 manual Mounting Hinge Side