Operation

Hush® Control Feature

Smoke alarms are designed to minimize nuisance alarms. Cigarette smoke will not normally set off the alarm, unless the smoke is blown directly into the alarm. Combustion particles from cooking may set off the alarm if the alarm is located close to the cooking area. Large quantities of combustible particles are generated from spills or when broiling. Using the fan on a range hood that vents to the outside (non-recirculating type) will also help remove these combustible particles from the kitchen. The Hush® button is extremely useful in a kitchen area or other areas prone to nuisance alarms.

The Hush® feature has the capability of temporarily desensitizing the smoke alarm circuit for about 7 minutes. This feature is to be used only when a known alarm condition, such as smoke from cooking, activates the alarm.

If the alarm does sound, check for fires first. If a fire is discovered, get out and call the fire department. If no fire is present, check to see if one of the reasons listed in Locations to Avoid may have caused the alarm.

The smoke alarm is desensitized by pushing the Hush® button on the smoke alarm cover. If the smoke is not too dense, the alarm will silence immediately and “chirp” every 30-40 seconds for approximately 7 minutes. This indicates that the alarm is in a temporarily desensitized condition. The smoke alarm will automatically reset after approximately 7 minutes. If after this period particles of combustion are still present, the alarm will sound again.

The Hush® feature can be used repeatedly until the air has been cleared of the condition causing the alarm. Pushing the Test button on the alarm will end the Hush® period.

NOTE: Dense smoke will override the Hush® control feature and sound a continuous alarm.

CAUTION: Before using the alarm Hush® feature, identify the source of the smoke and be certain a safe condition exists.

10

Page 10 Page 12
Page 11
Image 11
Kidde 0976CA manual Hush Control Feature
Page 10 Page 12

0976CA specifications

Kidde 0976CA is a robust and versatile smoke alarm designed to enhance home safety through advanced technology and user-friendly features. This unit is engineered to provide reliable smoke detection, helping to protect families from potential fire hazards.

One of the standout features of the Kidde 0976CA is its dual-sensor technology. This model incorporates both photoelectric and ionization sensors, offering comprehensive detection capabilities. The photoelectric sensor is excellent for detecting smoldering fires, which often produce more smoke than flames. In contrast, the ionization sensor is effective for detecting fast-flaming fires. This combination ensures that the device can promptly respond to a wide range of fire scenarios.

Moreover, the Kidde 0976CA is equipped with a large, easy-to-read digital display that provides real-time information regarding the status of the smoke alarm. This feature not only indicates when the device is active but also alerts users to any detected smoke, sound, or error conditions. The display also shows the battery status, ensuring that users are always aware if maintenance is required.

Battery backup is another critical characteristic of the Kidde 0976CA. In the event of a power outage, this smoke alarm will continue to function, providing peace of mind during emergencies. Its easy-to-replace battery design ensures that routine maintenance can be performed without hassle.

In terms of installation, the Kidde 0976CA is designed for convenience. The alarm is lightweight and can be mounted on walls or ceilings with minimal effort. The user manual includes step-by-step instructions that make it accessible even for those with limited DIY experience.

Safety is further enhanced by the LED indicator lights, which serve to visually alert occupants when smoke is detected or if the device requires maintenance. Additionally, the Kidde 0976CA comes with a test button that allows users to easily check the alarm’s functionality, ensuring that it is always in working order.

The Kidde 0976CA is a reliable smoke alarm that combines advanced detection technology with user-friendly features, making it an essential addition to any home’s safety system. Its dual-sensor capabilities, digital display, battery backup, and easy installation reflect Kidde's commitment to providing effective fire safety solutions. With this smoke alarm, homeowners can feel more secure knowing they have taken proactive measures to protect their loved ones and property from fire dangers.
Top Page Image Contents