Kidde 1296 warranty Model, Description, Consumer Benefits, Features and Benefits, Test Button B

UTHA / UTGT Compliant Smoke Alarm

• Model 1296

Test Button B

Tests the alarms sensor sensitivity

Test Button A

Tests the units electronic circuitry, horn and battery

Separate Trim Ring

Fits all standard electrical box configurations

Description

The Kidde 1296E is a 120VAC direct wire-in smoke alarm offering a level of protection that you have come to expect in a Kidde product. The Kidde 1296E is designed to alert you and your family from the dangers of smoke and fire. This smoke alarm utilizes an ionization sensor. (For maximum protection Kidde recommends that both photo- electric and ionization smoke alarm be used). The 1296E has interconnect capabilities and can be interconnected up to 24 Kidde devices including smoke alarms, CO alarms and heat alarms. The 1296E includes a 9V battery backup to provide continuous protection, even during a power failure along with a 5 year limited warranty. The Kidde 1296E has been designed manufactured and approved to UTHA/UTGT standards.

Consumer Benefits

The Kidde 1296E 120VAC direct wire-in smoke alarm pro- vides an early warning signal to you and your family in the event of a smoke or fire incident. This smoke alarm is listed as a commercial residential multiple-station smoke alarm and meets the UTHA sensitivity verification criteria. The 1296E may be installed in one and two family dwellings, lodging and rooming houses, apartment build- ings, hotels, dormitories, day care houses, and residential board and care facilities. This smoke alarm is equipped with two test buttons. Test button A is used for testing the unit’s electronic circuitry, horn and battery. Test button B tests the alarms sensor sensitivity

Features and Benefits

•UTHA/UTGT Compliant – Meets the sensitivity verification criteria outlined in NFPA 72 and may be installed in one and two family dwellings, lodging and rooming houses, apartment buildings, hotels, dormitories, day care homes, and residential board and care facilities.

•Two Test Buttons – Verifies alarm operation and sensitivity verification.

•Interconnectable System – Interconnects with up to 24 Kidde devices (of which 18 can be initiation) including smoke, co and heat alarms.

•9V Battery Backup – Provides protection even during power failures.

•Alarm Memory – Informs you if the alarm has sounded since the test button was last pressed.

•Tamper Resist – Helps prevent someone from tampering with or removing smoke alarm from mounting bracket.

•Separate Trim Ring – Fits all standard electrical box configurations.