120VAC Dual Mode Strobe Light | Unit Number SL177i |
for the Hearing Impaired |
|
|
|
Architectural and Engineering Specifications
The strobe light shall be Kidde Unit SL177i or approved equal. It shall be powered by a 120VAC, 60Hz source. The temperature operation range shall be between 40°F and 100°F (4°C and 38°C). The strobe light can be installed on any standard single gang electrical box, up to a 4” octagon junction box. The electrical connection (to the alarm) shall be made with a
This unit shall include a bright candela strobe light with a flash rate of one (1) flash per second. This unit shall be interconnected with Kidde smoke alarms, heat detectors and/or carbon monoxide alarms. The unit shall at a minimum meet the requirements of UL217, NFPA72, (chapter 10 & 11 2002 edition) The State of California Fire Marshall, NFPA101 (One and two family dwellings, Federal Housing Authority (FHA), Housing and Urban Development (HUD), Americans with Disabilities Act (ADA).
Technical Specifications
Unit Number: | SL177i |
UPC: | |
|
|
Power Source: | 120VAC, 60HZ |
|
|
Temperature Range: | 40˚F to 100˚F (4˚C to 38˚C) |
|
|
Size: | 5.6” in diameter x 3” depth |
|
|
Weight: | 1lb |
|
|
Interconnects: | Up to 24 Kidde devices |
|
|
Warranty: | 5 year limited warranty |
|
|
Installation of Strobe Light
The strobe light should be installed to comply with all local codes having jurisdiction in your area, Article 760 of the National Electric Code, and NFPA 72. Make certain all alarms are wired to a single, continuous
5.6" | 3" |
Ordering Information
Gift Box UPC: |
|
|
|
|
|
| |
Part |
|
| Dimensions |
| Case/ | Layers/ | Skid |
Number | I 2 of 5 | Pack Quantity | (w x d x h inches) | Weight | Skid | Skid | Weight |
|
|
|
|
|
|
|
|
SL177i | N/A | Individual | 5.75 x 3.25 x 6.75 | 1lb | N/A | N/A | N/A |
|
|
|
|
|
|
|
|
SL177i | 200 25417 19129 9 | 3 units | 6.5 x 10.5 x 6.5 | 3lbs | 120 | 5 | 360lbs |
|
|
|
|
|
|
|
|
Distributed by:
1394 South Third Street, Mebane NC 27302
